web analytics
  Loading... Please wait...

Kinetic Recovery Rope Info and Usage

Kinetic Recovery Rope Info and Usage

ASR Offroad's Kinetic Recovery Ropes are designed and built with the express purpose of stretching under load, to provide a smooth and powerful pull.  A Kinetic Recovery Rope, also sometimes referred to as a snatch rope or a yanker, is different than a typical tow rope or tow strap.  Some key features that set our Kinetic Recovery Ropes apart:

  • 100% US Made Double Braid Nylon
  • Maximum Strength Nylon (Other black bylon products have strength ~10% lower)
  • Professionally spliced in the US by ASR Offroad's trained and certified splicers
  • Abrasion protection in the eyes and on the rope body
  • Up To 30% Elongation Under Load

Benefits of Using ASR Offroad's Kinetic Recovery Ropes over other recovery/tow equipment:

  • More Durable and Less Susceptible to Damage from Normal Wear and Tear
  • Decreased Shock Loads on Recovery Mouting Points
  • Superior Performance Recovering Larger Vehicles With Much Smaller Tow Vehicle
  • Superior Performance in Very Low Traction Situations
  • Light Weight and Portable

How to Correctly Use Your Kinetic Recovery Rope

Step 1: Verify your equipment is adequate for the use and in good condition.  A Kinetic Recovery Rope should be sized such that the Min. Breaking Load (MBL) is roughly 2-3 times the Gross Vehicle Weight.  To properly select a rope for your vehicle, follow the guidelines on the chart below.
Step 2: Securely attach rope to both vehicles - use a proper shackle or tow point.  Recovery points should be properly welded or bolted to the vehicle chassis.  WARNING: Never connect recovery equipment to a tow ball, as they are not designed for this type of load and can fail, causing serious damage.
Step 3: Ensure all bystanders are well clear of the area.  No person should be within 1.5xthe rope length of either vehicle, unless inside one of the vehicles.
Step 4:  Tow the stuck vehicle out.  The towing vehicle can start with slack in the tow rope and drive up to 15mph max. WARNING: Do not exceed 15MPH with a properly sized rope.  WARNING: Do not pull in a direction that would side load your recovery points unless they are specifically designed to handle side loads; most are not.  Continue to pull on stuck vehicle until no longer stuck.
Step 5:  Unhook and stow your rope.

Kinetic Recovery Rope Specifications & Selection

The rope properties below are the published strengths for the rope sizes we manufacture.  To select the proper rope size for your application, the Vehicle Class is presented as a guide.  It is not a hard and fast rule, as many environmental factors such as slope, type and consistency of terrain vehilce is mired in, and mire depth all play a role in determining the force that will be required to recover the stuck vehicle.  We recommend following this chart unless you expect extreme environmental conditions, in which case it may be desirable to increase the diameter by one level.  We do not recommend decreasing the diameter for lighter environmental conditions.

Rope DiameterMin. Breaking StrengthVehicle Class
1/2" 7,400 lbs ATV/UTV
3/4" 19,000 lbs Cars, Samurai, Light Buggie, 2Dr Jeep, & Similar
7/8" 28,300 lbs 2 & 4 Dr Jeep, Cherokee, FJ40, Tacoma P/U & Similar
1" 33,500 lbs 1/2 & 3/4 Ton Truck, Expedition, Durango, 4dr Jeep
1-1/4" 52,300 lbs 3/4 & 1 Ton Truck, Heavy Mud Bogging Vehicles
1-1/2" 74,000 lbs 1 Ton Trucks, Class 4 & 5 Vehicles

What's News


Copyright 2019 ASR Offroad. All Rights Reserved.
 Sitemap | BigCommerce Premium Themes by PSDCenter